Qtz250 (7030) Model Top Kit Tower Crane 16ton Tower Crane
Jib length: 70m
Tip load: 3t
Mast: 2x2x3m
Free standing height: 51.7m
With reliable product performance, reasonable price, and high-quality after-sales service, we have won praise from many customers at home and abroad. We will continue to make Fixed Type Hammerhead Tower Crane, Construction Hammerhead Tower Crane, Traveling Hammerhead Tower Crane better with a meticulous attitude and give back to our customers. Due to stable quality and low price, our products are sold at home and abroad, and have won the trust and praise of our customers. Our company wholeheartedly welcomes domestic and foreign customers to visit our company for inspection and guidance. Customers' satisfaction is our best advertising. Safe, pioneer and innovative production is the principle of every employee of our company, and they are in line with this principle of relentlessly pursuing technological innovation.
QTZ7030 Topkit Tower Crane
Topkit Tower Crane QTZ7030-16t with Max.load of 16tons
Jib length: 70m
Tip load: 3t
Mast: 2x2x3m
Free standing height: 51.7m
Working type: stationary type, inner climbing type and traveling type.
Main Specifications
Model | QTZ7030 | |
Max Load | 16tons | |
Tip Load | 3tons | |
Jib Length | 70m | |
Free Standing Height | Stationary | 51.7m |
Mechanisms | Hoisting Speed (m/min) | (a=2) 0-45m/min: 8t; 0-90m/min: 4t |
Trolleying Speed (m/min) | 0-65m/min | |
Slewing Speed (r/min) | 0~0.7r/min | |
Power | Hoisting (KW) | 75KW |
Trolleying (KW) | 9KW | |
Slewing (KW) | 2x9KW | |
1. Before product packaging, check each part of the product to make sure there are no missing parts. At the same time, for small parts, with iron case or wooden case packaging.
2. During product packaging, in order to prevent product parts in the process of transportation by heavy extrusion deformation, we carry out special protection for each part, especially the support part, effectively avoid deformation. In order to prevent the friction between the parts of the paint, we will use rubber belt in the bottom and then use steel belt binding, and use rubber wrapped iron wire for binding and fixing, as far as possible to reduce the occurrence of paint.
3. For the electrical parts and the mechanisms, we will pack them in wooden cases to protect against moisture.
4. Adopt the export shipping method of container.
5. We usually use sea, land and railway transportation.
By analyzing the old process and usage of Qtz250 (7030) Model Top Kit Tower Crane 16ton Tower Crane, we have formulated a new process, thereby improving product quality and economic benefits. The development of an enterprise is not the result of individual labor but the crystallization of team wisdom. The company takes the needs of customers as the center and sincerely welcomes your visit.
You Might Also Like
Send Inquiry